ePRO Inverter Charger Combi - 12 Volt to 240V Pure Sine Wave Inverter (2600W) with 120 Amp Battery Charger with Auto Transfer Switch (EPC 3000-12)
ePRO Inverter Charger Combi - 12 Volt to 240V Pure Sine Wave Inverter (2600W) with 120 Amp Battery Charger with Auto Transfer Switch (EPC 3000-12)
-
Online Price: $3,810.00 (including 10 % GST tax)
- OR -
Australia's best price on ePRO Inverter Charger Combi - 12 Volt to 230V Pure Sine Wave Inverter (2600W) and 120 Amp Battery Charger with Auto Transfer Switch (EPC 3000-12)
Includes Auto Transfer Switch, 3m Temperature Sensor
Ideal for marine, boats, yachts caravan RV & Motorhomes. Includes Auto Transfer Switch and 3m Temperature Sensor
overview
ePRO Inverter Charger Combi - 12 Volt to 230V Pure Sine Wave Inverter (2600W) (EPC 3000-12)
with 120 Amp Battery Charger, Auto Transfer Switch
2600W Continuous - 3200W@10 Minutes - 5000W Surge
All-in-one combination of a DC to AC true sinewave inverter, an advanced multi-stage battery charger with a high speed AC transfer switch. The ePRO Inverter Charger has all this built into one compact, yet installer friendly enclosure. Besides these three main functions, there are several unique features offered as well. Some of which benefit from the strong interaction between the three main functions.
specification
Model | EPC 2000-12 | EPC 2500-24 | EPC 3000-12 | EPC 3500-24 | ||
---|---|---|---|---|---|---|
Note: Specifications subject to change without notice. | ||||||
Output power (1) Pnom | 1800W | 2000W | 2600W | 2800W | ||
P10minutes | 2100W | 2500W | 3200W | 3800W | ||
Psurge | 4000W | 5500W | 5000W | 6500W | ||
Output voltage / frequency | 230 Vac ± 2% / 50 Hz ± 0.05% | |||||
Output waveform | 230 Vac ± 2% / 50 Hz ± 0.05% | |||||
Input voltage (± 3% tolerance): Nominal | 12V | 24V | 12V | 24V | ||
Range | 10.5 (2) – 16 Vdc | 21 (2) – 32 Vdc | 10.5 (2) – 16 Vdc | 21 (2) – 32 Vdc | ||
Maximum efficiency | 92% | 93% | 92% | 93% | ||
No load power consumption (2) [ASB] | <20 W [3.5 W] | <20 W [4.0 W] | <20 W [3.5 W] | <20 W [4.0 W] | ||
Charger stage |
||||||
AC input voltage | 185 – 270 Vac / 45 – 65 Hz / PF > 0.95 | |||||
Maximum continuous charging current (4) | 80A | 50A | 120A | 70A | ||
Standard charge voltage (bulk / float @ 25°C) | 14.3V / 13.3V (programmable) | 26.6V / 26.6V (programmable) | 14.3V / 13.3V (programmable) | 28.6V / 26.6V (programmable) | ||
Charge algorithm | IUoUoP, intelligent 4-stage, temperature compensated (programmable) | |||||
AC Transfer Switch |
||||||
Maximum continuous current | 30 Ams | |||||
Transfer time (typical) | 0 ms (inverter to mains) / <5 ms (mains to inverter) | |||||
General |
||||||
ePROLink enabled | Yes | |||||
Protections | high/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage | |||||
DC connections | M10 bolt terminals | |||||
AC connections | Screw terminals | |||||
Enclosure body size | 370 x 431 x 132mm | |||||
Total weight | 18.5 Kg | |||||
Protection class / operating temp. / storage temp. | IP21 / -20°C.. +50°C / -40°C.. +80°C (humidity max. 95% non-condensing) | |||||
Standards | Complies with IEC 60335-2-29 including Australian deviations. |
- Measured with resistive load at 25°C ambient. Power ratings are subject to a tolerance of 10% and are decreasing as temperature rises with a rate of approx. 1.2%/°C starting from 25°C. Pnom is a typical value, measured using battery capacities of 200 Ah @ 12 V and 100 Ah @ 24V
- Undervoltage limit is dynamic. This limit decreases with increasing load to compensate the voltage drop across cables and connections.
- Measured at nominal input voltage and 25°C.
- At high ambient temperatures, maximum output current shall be reduced automatically.